EiVisu - KNX - system visualization
EiVisu enables the end customer to display and operate a KNX system in a floor plan.
Lighting, heating, blinds and energy monitoring are supported. In addition, EiVisu can keep log files and send e-mails.
EiVisu runs on a Windows 10 PC or tablet and can be connected to the KNX bus via routing or USB. The best thing is: you have already created the visualization when you have created your ETS project with EIplan.
The new KNX visualization EiVisu4 is available free of charge to all KNX users who create their ETS project with the Nautibus ETS app EiPlan.
- Display and operating software for end customers
- KNX system compatible
- Floor plan display
- Weather data display
- Lighting can be switched by touch in the floor plan
- Heating circuit display with room temperature, setpoint and manipulated variable
- Blind operation and display
- Slider for dimming function and room temperature
- Additional displays for measured values and status messages
- Automatic configuration via the ETS with the EiPlan app
- Data logger for recording all KNX telegrams on the bus, a file is automatically generated for each day.
- Email sending to the user according to schedule and in the event of malfunctions
Installation
Requirements
KNX system and project creation with ETS app EiPlan version from 4. 0.
IP router with connection to WLAN or KNX USB interface Windows 10 PC or tablet with WLAN or USB.
Software installation
An Internet connection is required for installation and automatic updates.
The software is installed using an "on-click installation" from our website.
Project data
Create a directory for the project data, e.g.. B.. C: / ETSprojekte / Mein_Haus copy the floor plans from the EiPlan project directory there.
Copy the Visu generated by EiPlan. xlm there.
Settings
Start EiVisu4.
Open the setup.
Set up the project and connection.
Limitations in current version
Time switch, default values and light scenes will be added soon.
End customer operating instructions
Choose
Use the floor plan buttons to select a floor. You select an object by tapping on lamps, sockets, blinds or heating circuits. The menu then shows the data and settings for it. Use the red exit button to return to the main menu.
Lighting and sockets
Touch a lamp in the floor plan. In the menu area you can switch on and off. With dimmable lamps, a slide control appears for the brightness.
heater
In every room there is a temperature display for the room temperature. A status LED shows heating = red, cooling = blue or off = gray.
If you touch the display, the heating menu opens. Here you can see all current values and can switch to comfort or reduction. on Slider enables the setpoint shift for the comfort temperature.
louvre
You will find blind symbols next to the windows that show the state of the blinds.
Tap on a blind symbol to open the blind menu. You can open and close the blind or adjust the slats.
Energy measurement
If you tap on a measurable consumer, the current consumption, operating hours and meter reading are displayed. You can switch the consumer on and off.
Central functions
The first floor plan button leads to a picture with measured values and states of the central groups. Here you will find values for the weather station and the heating system.
Further steps
Test and trial
Under Download you will find the software, the description and a sample project. With this you can get to know EiVisu4.
Project creation
To create your own project, you need an ETS5 and our EiPlan app with version 4 or higher. 0.
With an ETS5 and our EiDoc app from version 4. 0 you can edit an existing ETS project and add floor plans so that you can also use EiVisu4.
| Downloads | |
|---|---|
| Manual |  PDF Download |
| software |  On-Click-Installation |
| Sample project |  ZIP Download |